* * * FOR ALL
TASK 72-00-00-800-819
1 . General.
A.This procedure gives instructions to use the FINS shank nut replacement repair to replace the shank nuts once the FINS is not in piece-part level condition.
B.This procedure can be used when the FINS is removed from CDN and is on QT (quick turn) shop visit or module level shop visit. There is no requirement to perform piece-part level inspection once you are with a referred repair.
•
Stage 1 nozzle assembly (01-080 , 72-40-00) (SIN 17200), (01-081 , 72-40-00) (SIN 17200), and (01-082 , 72-40-00) (SIN 17200)
•
Forward inner nozzle support (01-030 , 72-51-00) (SIN 172A1), (01-031 , 72-51-00) (SIN 172A1), and (01-032 , 72-51-00) (SIN 172A1).
2 . Tools, Equipment, and Materials.
NOTE:
You can use equivalent alternatives for tools, equipment, and consumable materials.
A.Tools and Equipment.
(1)Special Tools. None.
(2)Standard Tools and Equipment. None.
(3)Locally Manufactured Tools. None.
B.Consumable Materials. None.
C.Referenced Procedures.
 
ATA
Description
 
72-51-01
Repair 001
D.Expendable Parts. None.
E.SPD Information. None.
F.Special Solutions. None.
G.Test Specimens. None.
3 . Procedure.
Subtask 72-00-00-350-006
A.Refer to TASK 72-51-01-300-801 (72-51-01, REPAIR 001).