![]() | COMMERCIAL ENGINE STANDARD PRACTICES MANUAL | Dated: 03/04/2020 |
SPM 70-00-99 S1141 - LIGHT DUTY ALKALINE CLEANING SOLUTION - C04-163 | ||
TASK 70-00-99-801-141 |
1 . | Composition. |
|
2 . | Preparation. |
Subtask 70-00-99-809-253 |
WARNING: |
|
A. | Ready for use (full strength). |
B. | Add Ardrox 6333A product slowly and carefully while stirring the solution to mix. |
C. | Fill tank with water to working level. |
D. | Stir solution again to mix. |
3 . | Check. |
Subtask 70-00-99-809-254 |
E. | Make an operational check. Refer to the following: |
|
F. | Follow the manufacturer's control procedures to maintain the solution. |
4 . | Regeneration. |
Subtask 70-00-99-809-255 |
G. | Remove dirt, oil and other unwanted material from the top of the tank at least every day and also as needed. |
NOTE: |
|
H. | Maintain solution strength within check limits. Increase strength (if necessary) by adding concentrate as required. Decrease strength by diluting with water. |
I. | Recover evaporation losses by filling tank to "working level" with water on daily basis. |