![]() | COMMERCIAL ENGINE STANDARD PRACTICES MANUAL | Dated: 10/01/2006 |
SPM 70-00-99 S1204 - LIGHT DUTY ALKALINE CLEANING SOLUTION - C04-267 | ||
TASK 70-00-99-801-801 |
1 . | Composition. |
|
2 . | Preparation. |
Subtask 70-00-99-809-436 |
WARNING: |
|
A. | Fill tank one-half (50%) full with water. |
B. | Add C04-267 product slowly and carefully while stirring the solution to mix. |
C. | Fill the tank with water to the working level. |
D. | Stir the solution again to mix. |
3 . | Check. |
Subtask 70-00-99-809-437 |
E. | Do the operational checks according to the manufacturer's instructions. |
|
F. | Follow the manufacturer's control procedures to maintain the solution. |
4 . | Regeneration. |
Subtask 70-00-99-809-438 |
G. | Every day, remove surface contamination from the tank. |
H. | Maintain solution within check limits by the addition of appropriate products. Obey the manufacturer's control procedures to maintain the solution. |
I. | Losses through evaporation will be made up by filling the tank with water to the working level on a daily basis. |
J. | Replace the solution if it loses its effectiveness. |