ILLUSTRATED TOOL AND EQUIPMENT MANUAL 11C4482

Sheet

3D Selection: Transparency:

Model: Group: SB: Check Boxes Full Table

R R R R R R R R R R R R R R R R R R R R R R R R R R	PURPOSE AND USE: This fixture is used to lift and turn the Stage 2 Blisk during assembly and disassembly for inspection, cleaning and depot activity.
R R R R R R R R R R R R R R R R R R R R R R R R R R	DESCRIPTION: This Tool consists of the following parts: Support (item 12) features an "L" shape. On one side it interfaces with the Trunnion (item 6) and on the other side it interfaces with the Pad (item 14). The Clamp (item 13) features an "L" shape with a slot on its middle. On one side it interfaces with the Support (item 12) and on the other side interfaces with the Pad (item 14). The Pads (item 14) is permanently installed on the Support (item 12) and Clamp (item 13) with no risk of damage it works to interface directly with the Engine Hardware. The Knob Screws (item 5) work to engage both the Support (item 12) and Clamp (item 13) as well as the Blisk during tool use and prevents them from disassembling. The Knob Screws (item 15) are commercial components that work to secure both the Support (item 12) and Clamp (item 13) together during tool use and prevents them to disassemble. The two (2) Trunnions (item 6) are commercial components that work to secure both the Support (item 12) and Clamp (item 13) together during tool use and prevents them to disassemble.
R R R R R R R R R R R R R R R R R R R R R R R R R R	DIMENSIONS: 5 in. x 12 in. x 4 in. (127.0 mm x 304.8 mm x 101.6 mm)
R R R R R R R R R R R R R R R R R R R R R R R R R R	WEIGHT: 51 lb. (23.1 kg) as a set
R R R R R R R R R R R R R R R R R R R R R R R R R R	QUANTITY PER UNIT OPERATION: 1
R R R R R R R R R R R R R R R R R R R R R R R R R R	SUPPORTING TOOLS: 9429M16 and 9446M25
R R R R R R R R R R R R R R R R R R R R R R R R R R	TOOL MAINTENANCE:
R R R R R R R R R R R R R R R R R R R R R R R R R R	SERVICING REQUIREMENTS: Read all operation and safety instructions before you use the tool. 1. Carefully unpack the Support Equipment (SE) from the shipping packaging and account for all the components, as described in the Technical SE Description and Pictorial view above. 2. Make sure that all the required documentation is included with the shipment. Place the documentation in the appropriate files. 3. Inspect all SE components to determine whether or not any damage was incurred during packing and shipment. 4. Install and/or assemble (if required) the SE in accordance with the Pictorial sketch, the Engine Maintenance Manual and/or the applicable design drawings.

REPLACEMENT PARTS LIST

ITEM

PART NO.

NOMENCLATURE

QTY

GROUP

GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or reproduced without the express written
consent of GE. Technical data is considered ITAR and/or EAR controlled; transfer of this data to a Non-US Person,
without USG authorization, is strictly prohibited.


R R	001	11C4482G02	FIXTURE, LIFT/TURN-HP COMPR RTR STAGE 2 BLISK	RF
R	005	11C4482P05	.KNOB, SCREW	2
R	006	9446M25P01	.TRUNNION	2
R R	009	COML	.SCREW, CAP, 8 SKT HD-STL (0.250-20 UNC-2A X 1.00) LG	8
R R R	010	COML(2)	.WASHER, FLAT TYPE 8 B-STL (0.734 OD X 0.281 ID X 0.063) THK	8
R R R	011	COML(3)	.WASHER, FLAT TYPE 4 B-STL (1.125 OD X 0.594 ID X 0.063) THK	4
R	012	11C4482P12	.SUPPORT	2
R	013	11C4482P13	.CLAMP	2
R	014	11C4482P14	.PAD	4
R	015	KA-7	.KNOB, SCREW V01599	2
R R	016	COML(4)	.SCREW, CAP, SKT LOW HD-STL (0.164-32 UNC-2A X 0.75) LG	8