![]() | COMMERCIAL ENGINE STANDARD PRACTICES MANUAL | Dated: 10/01/2006 |
SPM 70-00-99 S1025 - ALKALINE CLEANING SOLUTIONS | ||
TASK 70-00-99-801-025 |
1 . | Composition. |
Subtask 70-00-99-809-159 |
2 . | Preparation. |
Subtask 70-00-99-809-140 |
A. | Preparation for portable equipment solutions. |
WARNING: |
|
WARNING: |
|
(1) | Fill the tank three-quarters full with water. |
(2) | Add one of the products listed in Subtask 70-00-99-809-159, Composition. Add the product slowly and carefully while stirring the solution to mix. |
(3) | Fill the tank with water to the working level. |
(4) | Stir solution again to mix. |
B. | Preparation for fixed equipment solutions. |
(1) | Use the liquid products full strength and adjust the metering orifice/valve on the equipment to obtain the concentration specified in Subtask 70-00-99-809-159, Composition. |
3 . | Check. |
Subtask 70-00-99-809-141 |
C. | Not applicable. |
4 . | Regeneration. |
Subtask 70-00-99-809-142 |
D. | Not applicable. |