TASK 70-11-02-400-006
1 . General.
A.Safety cable is an alternative to safety wire unless specifically prohibited by the assembly procedure. Safety cable is installed through a maximum of three parts in such a way that if the fastener or part loosens, the safety cable will tighten. When the safety cable tightens it will not permit the fastener or part to turn.
B.There are three methods used to install safety cables. These three methods are equivalent alternatives and are interchangeable:
TASK 70-11-03-400-007, Safety Cable Method No. 1 (Bergen Tool),
TASK 70-11-04-400-008, Safety Cable Method No. 2 (Snap-On Tool), and
TASK 70-11-05-400-009, Safety Cable Method No. 3 (Daniels (DMC) Tool).