* * * FOR ALL
TASK 72-00-00-800-809
1 . General.
A.This procedure gives reference to TASK 72-57-01-300-801 (72-57-01, REPAIR 001) that provides instructions to repair the turbine rear frame (TRF) by repositioning the position of dislocated mount bushings.
B.This procedure can be used when the TRF assembly is attached to the low pressure turbine (LPT) rotor/stator assembly (with or without the mid fan shaft), refer to TASK 72-00-04-200-801 (72-00-04, INSPECTION 001) or if it is separated from the LPT rotor/stator assembly, refer to TASK 72-00-57-200-801 (72-00-57, INSPECTION 001) .
•
LPT rotor/stator assembly (01-010 , 72-00-04) (SIN 93000)
•
LPT rotor/stator assembly (01-010A , 72-00-04) (SIN 93000) (SB 72-0040)
•
TRF assembly (01-020 , 72-00-04) (SIN 94000)
•
TRF assembly (01-021 , 72-00-04) (SIN 94000) (SB 72-0160) (Non Rake Configuration)
•
TRF assembly (01-022 , 72-00-04) (SIN 94000) (SB 72-0160) (Rake Configuration).
2 . Tools, Equipment, and Materials.
NOTE:
You can use equivalent alternatives for tools, equipment, and consumable materials.
A.Tools and Equipment.
(1)Special Tools. None.
(2)Standard Tools and Equipment. None.
(3)Locally Manufactured Tools. None.
B.Consumable Materials. None.
C.Referenced Procedures.
 
ATA No.
Description
 
72-00-04
Inspection 001
 
72-00-57
Inspection 001
 
72-57-01
Repair 001
D.Expendable Parts. None.
E.SPD Information. None.
F.Special Solutions. None.
G.Test Specimens. None.
3 . Procedure.
Subtask 72-00-00-350-003
A.Refer to TASK 72-57-01-300-801 (72-57-01, REPAIR 001).